|
Fragment of handle only.
The handle is in the form of a conventionalized plane leaf.
Clay: buff; dark-brown glaze. Below Great Wall ... 1931 |
Clay: fine buff. City Wall, black earth along N. face toward E. end of Long Stoa ... 1934 |
| Fragment of base only.
Clay: fine buff. Assembly Place, behind retaining wall of Period III. 94-17-26 ... 1931 |
Fragment of nozzle only.
Clay: fine reddish; dull black glaze. Filling of Long Stoa ... 1934 |
Small fragment.
Clay: fine grey (burned); black glaze inside and out. Assembly Place, behind retaining wall of Period II ... 1931 |
Fragment of rim only.
The rim bears a petal design in relief. A dolphin at one point is in still higher relief.
Clay: gritty orange; brown glaze outside; reddish inside. Filling of Long Stoa ... 1934 |
Fragment of body, and nozzle only.
Clay: fine reddish; black glaze inside and out. Assembly Place, behind retaining wall of Period III ... 1931 |
Fragment of handle only.
Plane leaf.
Clay: gritty buff; red glaze (peeling). Filling of Long Stoa ... 1934 |
Large parts of body missing.
Clay: reddish; orange-red glaze. City Wall, black earth along N. face toward E. end of Long Stoa ... 1934 |
Clay: orange, brown-red glaze. Assembly Place, behind retaining wall of Period III ... 1931 |
Clay: gritty buff; dull red glaze. City Wall, black earth along N. face toward E. end of Long Stoa ... 1934 |
| Handle and fragment of rim only.
Clay: fine buff. Assembly Place, behind terrace wall of Period III. 94-17-22 ... 1931 |
| Handle and fragment of rim only.
Clay: slightly gritty buff-red. Assembly Place, behind terrace wall of Period III ... 1931 |
| Fragment of rim and body only.
Clay: fine buff. Assembly Place, behind terrace wall of Period III ... 1931 |
| Fragment of rim and discus only.
Clay: fine buff (burned). Assembly Place, behind terrace wall of Period III. 94-17-23 ... 1931 |
Fragment of rim only.
Clay: fine reddish; black glaze inside and out. Assembly Place, behind retaining wall of Period II ... 1931 |
Concave discus with small filling hole. Surrounded by double ridge. Volutes on nozzle. Vertical strap handle. Alpha in relief on bottom. Raised dots on body.
Clay: gritty brown; dull black glaze. Wall ... 22/6/1986 |
Almost straight sides. Short, stubby nozzle. Single wide groove around rim. Central hole for support on stand (upper part broken off).
Clay: fine reddish, black glaze (worn) except on bottom and in groove ... 07/07/1936 |
Fragments of base and side preserved.
Double groove around base. Inscription in relief. Heart-shaped design in relief on base of doubly grooved handle.
Clay: fine buff, slightly gritty. Wall Trench ... 1936 |
Fragment of discus.
Warrior to right, holding short sword in right hand, shield, of rectangular shape in left. Shield has groove at border, and indistinct device. At right, a small bear attacking the ... 1936 |
Depressed filling hole with groove around it.
Two grooves around edge of top. Pierced lug on left side.
Clay: fine buff (burned grey), black glaze inside. Wall Trench. 1156 ... June 18,19 1936 |
Rim and part of nozzle only preserved.
Plain filling hole without ridges. Shallow groove around edge of top.
Clay: fine buff, polished outside, black glaze inside. Wall Trench. 1156 ... June 18, 19 1936 |
Nozzle chipped.
Rounded body with wide, flat molding around filling hole. No handle or lug.
Clay: fine, light red; red glaze inside. Wall Trench, WT 192. 1422 ... July 30 1937 |
Usual shape. Fairly short blunt nozzle. U shaped bar handle (horizontal) missing. Base practically flat.
Clay: fine buff; worn black glaze inside and out except on base (dipped). Wall Trench 162. 1359 ... 21 July 1937 |
Handle broken off; part of body missing.
Watch-shaped body,no base. Long nozzle, spreading slightly at end. Depressed discus with fairly large filling hole. Vertical strap-handle, now missing. Large ... Early 2nd. |
Chips out of body and end of handle.
High, straight-sided body. Wide molding around filling hole. Usual nozzle, chipped but used after chipping. No handle. Normal base.
Clay: reddish, black glaze inside ... 6 July 1937 |
Fragmentary.
Mould for top of lamp pattern of long tongue with rows of circles between them. Double groove around filling-hole. On the outside of mould is plain, with two lines cut in one side near the ... 7 June 1934 |
Fragment.
Ray pattern from central ring. On outside: plain except for a rough knob.
Clay: fine, brownish. Long building, E. end, original red filling along S. side ... 29 June 1934 |
Body chipped, handle missing.
Watch shaped body, very short nozzle, flaring with depression at the two upper corners. Ridged rays on top, formed at outer edges, there forming sort of tongue pattern ... 28/8/1937 |
Complete.
Shape rather peculiar: base like Type VIIb, body shape more Hellenistic, though not as watch shaped as Type X. Raised ring around filling hole, long tapering nozzle with squared off end. Pierced ... 24/8/1937 |
Fragment from side and part of nozzle.
Thick walled. Flat edge except for depression beside the nozzle. Very fine dots punched in bottom, seems hardly likely that they can have appeared in the cast ... 20/12/1930 |
Parts of body missing.
Watch shaped body. Depression around filling hole. Raised, concave base. Ridged rays around shoulder. Long, pointed nozzle with grooves down either side. Vertical strap handle ... 1/7/1936 |
Broken at right end. Along the lower edge four small piercings. Letters made with wedge-shaped object. Thicker at left end. Three small holes at bottom. Assembly Place, filling of Period III. α) ΑΛΑΕ[ΥΣ] ... 11 December 1930 |
Broken at the right end. Clearing below the Great Wall. ΠΑΜΦ[ΙΛΟΣ]
ΠΑΥΣΙ[ ... ] ... 19 February 1931 |
| The upper right corner is broken away. Pierced near the right end. Ενεπίγραφο δικαστικό πινάκιο. Φέρει αποκρούσεις στη μία του πλευρά. Clearing below the Great Wall, east side. α) ΚΟΛΛΥ[ΤΕΥΣ]
β) ΑΓΝΟΘΕΟΣ ... 27 February 1931 |
Broken at both ends. Thin piece. Assembly Place, filling of Period III. ΣΤΡΑΤ[---]
ΒΟΥΤΑ[ΔΗΣ] ... 26 January 1931 |
Broken at both ends. Assembly Place, filling of Period III. α) [--].ισια[---]
[Α]θμο[νευς]
β) [Με] ίδων Τι [---]
[Κο]λλυ(τεύς) ... 1931 |
Assembly Place, filling of Period III. α) Λυσι[---]
Δαμάσο[υ]
β) Ξενοκ[---]
Παιονί[δης] ... October 1932 |
The shaft is diamond shaped in section. Intaglio: Pegasus with pointed wing, to left. Well-modelled, rounded not flat. Details careful; proportions bad - head very small, legs [?]. Assembly Place, filling ... 16 October 1932 |
Above are two square plinths, superimposed. Thin edges lightly rilled. To the top of the upper is attached the plain bronze ring. From the lower hangs a mass of bronze shaped to resemble a cluster of grapes ... 11 December 1930 |
A thin-walled tapering bronze tube, open at both ends. At the larger end two small bronze rings are set about it, one exactly at the end, the other 0.008m. from the end. Assembly Place, filling of Period ... 13 December 1930 |
A plain bar of bronze, round in section, but flattened at one end. The flattened portion bend in an obtuse angle to the round part. Assembly Place, filling of Period III ... 13 December 1930 |
A plain bar of bronze, forked at one end, at the other hammered into the shape of a wedge in the same place as the fork. Possibly to be set into wooden handle. Does not look like netting needle - prongs ... 3 January 1931 |
A bar of bronze square in section, tapering gently to a blunt point at either end. Cf. (?)- The Roman and Etruscan Bronzes no. 1745 pp. 449. Calls it a "double probe with two (?) ends," From Cyprus. Assembly ... 11 December 1930 |
The top of the head is covered and smooth; its edge hammered so as to hang down slightly. The upper 0.02m. of the shaft are round, the rest octagonal in section, tapering to a blunt point. Assembly Place, ... 8 January 1930 |
The bezel and a very little of the shank remain. Intaglio. An eagle standing right, with head turned back. Very indistinct. East Sanctuary, clearing between Trenches α and γ ... October 1932 |
Flat, approximately square head. Shank circular in section near the head, rectangular at the bottom. Assembly Place, filling of Period III ... June 1931 |
Large, slightly convex head. Rectangular shank. Thesmophorion - clearing between Trenches α and γ ... October 1932 |
Nearly spherical, with slightly flattened bottom, and small knob on top. Perhaps a "sinker" for fishnets. Thesmophorion - clearing trench of city wall. Northeast corner ... 1932 |
Rectangular object, rather bent out of shape. Perhaps a weight. Thesmophorion - fill behind retaining wall ... 1931 |
A square plinth of lead carrying in relief a tortoise and the inscription ΔΕΜΟ (retrograde). On the back of the shell a rectangular stamp containing an owl facing. D.T.S. p.550 - Tortoise indicate τέταρτον ... 8 October 1932 |
A drop of lead, flat below, convex above, on which in cameo is the figure of a tree impressed by a fine seal (circular). East Sanctuary, clearing between trances α and γ ... 13 October 1932 |
A heavy ring of lead decorated on one side with a wreath of ivy leaves and berries; on the other by rays. The four channel has left its mark on the edge of the ring. East Sanctuary, clearing between Trenches ... October 1932 |
| Found rolled with iron nail through it. Unrolled, inscription on one face East Sanctuary; clearing around the stele beddings at the north east corner of the city wall ... 1932 |
Lead ball with square stem attached at one side. Projecting ring in middle of stem. Probably "sinker" for fish-net. Assembly place, surface ... 1930 |
Heavy flat ring with decorations in relief: one face has ivy leaves and berries, the other rays. Raised ridge around central hole. Long Stoa - original red filling along South side ... 1934 |
Flat disk (edge rolled in on one face). Both faces scratched. ***OBJECT MISSING*** Assembly Place, filling of Period III.
Lot 28.5 gr ... 1932 |
Thin flat strip, rounded off at one end, the other end broken. It looks like a strap. Assembly Place, filling of Period III ... 1931 |
Conical shape with truncated top. Bottom uneven, with edges turned under. Single suspension hole. Thesmophorion - clearing around stele bedding at northeast corner of city wall. (Mostly IV and III B.C.) ... 1932 |
Disk bearing impression of seal, representing a stele (?), in relief. Reverse plain; flat. C.f. PNM 61. Surface ... 1936 |
The shape is roughly hemispherical, the bottom concave, as if cut out. A small knob at the top. Probably a "sinker". Thesmophorion - clearing city wall; Northeast corner ... 1932 |
The four sides are equal, the bottom and top, flat. One small suspension hole pierced near the top, a larger one through the center of the weight. Thesmophorion - fill behind retaining wall ... 1932 |
The flat strip, of uneven width, is bent into a loop. A hole is pierced near the center of the loop. Assembly Place, filling of Period III ... 1932 |
The bottom is flat, the top slightly curved. Suspension hole near the top. Long Stoa - disturbed filling at north end ... 1934 |
The sides are roughly bevelled off near the bottom and rolled under it. The top is rounded. Suspension hole near the top. Long Stoa, southeast corner, from first layer below firm white strosis ... 1934 |
Bottom slightly convex; sharp-angled sides. Slight depression in the bottom. Deep horizontal cut in one side. Below Great Wall ... 1931 |
The strip is of varying width, unevenly cut, roughly in the shape of a blade. Perhaps the result of trimming off some larger object. Both sides perfectly flat. Thesmophorion - clearing between trenches ... 1932 |
Square plaque, perfectly plain. Thesmophorion - between trenches α and γ ... 1932 |
| Upper and left edges preserved.
Inscribed on one face: Assembly Place, filling of Period III ... 1931 |
The top is flat, the bottom very uneven. The sides are pressed in at the bottom and rolled under. Very small suspension hole near the top. Thesmophorion - fill behind retaining wall ... 1932 |
Rectangular (square) in section, tapering slightly at one end, flattened at the other. Like a crude stylus, but could hardly have been used for this purpose. Thesmophorion - fill behind retaining wall ... 1932
1934 |
Lead tube with very small hole only partially piercing it. One end widened, and the edges turned inward. Assembly place, filling of Period III ... 1930 |
The disk was cut out, somewhat unevenly, from a lead plaque. A large hole pierces the center, and three smaller holes are placed at equal distance around the edge. For attachment to something. Assembly ... 1931 |
Three clamps of the sort used for mending coarse pottery. One of them is still attached to a sherd of light, red micaceous clay. Assembly Place, filling of Period III ... 1931 |
Semicircular in section (convex outside). Probably too small for a finger ring. Long Stoa - east end, south side ... 1934 |
Lead object (cast) resembling a buckle plate. Net design in relief at one end (broken off). Back flat. Imitation of something. Check bibliography.
See Darwin(?) - Art. Goth.(?),p. 264, pl. CLXXXI, 21-23; ... 1932 |
Disk representing stele (?) in relief - much battered. Reverse plain. Apparently identical with PNM 33, but smaller. Impression same size, piece smaller. Assembly Place, surface ... 1934 |
Disk with representation of head (?) to right. Satyr or actor's mask. Reverse flat and plain. With coin of Athens - 255-229 B.C. Long Stoa - east end, south side, three layers ... 1934 |
Disk with representation of a tripod on an omphalos. In field, right: ΓΕΝ. Reverse has something on it, but completely unintelligible - no hope. Thesmophorion - filling behind retaining wall ... 1932 |
| Disk with representation of amphora. Reverse plain. Assembly Place, filling of Period III. 84-10-28, 84-10-29, 84-10-30, 84-10-31, 84-10-32 ... 1934 |
Disk with representation of Hermes facing 3/4 left wearing pileus; in right hand the caduceus, on left arm a child. Looks back at child. Child's arm hangs down, perhaps holding brunch of grapes. Chlamys ... 1932 |
Disk with representation of oenochoe (?), with a box-like object on either side, and in the field the letters: A I
A N
(I may be Γ or Π, broken ... 1932 |
Disk with alpha on one side, and some object beneath it. Reverse plain. Assembly Place, filling of Period III ... 1932 |
Disk with representation of male head to right. Reverse plain. Assembly Place, filling of Period III ... 1932 |
Irregular disk with representation of kernos. Reverse plain. Assembly Place, filling of Period III ... 1932 |
The weight, or sinker, made in a double mold, is uneven on the bottom, and has a knob on top. Wall Trench D. 1017 ... 15 June 1936 |
The object is conical, but with slightly concave sides, and bevelled near the bottom. Beneath was an arrangement for attachment, probably to wood. Perhaps from a piece of furniture. Long Stoa - est end, ... 1934 |
Square; upper surface decorated with raised amphora, with letters in corners; under surface smooth, with slight hollow in center. Wall Trench K, east of wall, 2.65m. below wall top in working chips. WT ... 6 July 1937 |
Square; turtle in relief on upper surface. Inscription on left beside turtle ? Addenda in pencil not deciphered. check
Found in July 2002. Wall Trench K, east of wall, in working chips. WT 202 ... 7 July 137 |
Edges slightly chipped, spokes bent. Eight spokes; raised and perforated hub. Cast, no roughnesses removed. Check bibliography.
For this whole subject, and the purpose of these, which he considers votive, ... 11 July 1937 |
Square; amphora in relief on upper surface (with mostly obliterated letters in corners). Deep dent in right shoulder of amphora. Check bibliography. Wall Trench, WT 170. 1412 ... 26 July 1937 |
Uneven surfaces, one of them with two small holes. Not perfectly round. Wall Trench. WT 120. 1193 ... 5 July 1937 |
Not quite circular; perforation in center; under side with raised floral design, upper with raised rays radiating from perforation. Wall Trench, WT 301. 617 ... 1937 |
Oval ring with three projections on the back. Check bibliography. Wall Trench Q, east of stoa, II layer. WT 139. 1290 ... 12 July 1937 |
Pin missing.
Bow flat inside, moulded outside, with engraved short lines between two long ones running length of bow. Bow flattened at pin end; ends in knob at other end. Check bibliography. Wall Trench ... |
On the decorated face of the mirror, before cleaning, there was the impression of a fabric in which it must have been wrapped. The warp and woof(?) are nearly of the same thickness, the warp perhaps a ... 1937 |
Hemispherical. Fastening on back missing. Slight groove around edge as molding. Fastening inside usual shape: section. Check WT Wall Trench U. WT 244 or 344 ... 12 July 1937 |
Not quite circular; perforation in center; relief rays on upper surface, grapevine on under surface. Wall Trench V, footing trench of mortared wall. WT 246 ... 12 July 1937 |
Under surface smooth; upper surface with longnecked bird in relief. Wall Trench M. 1334 ... 13 July 1937 |
Under side smooth, upper side with figure of man marching to the right. Wall Trench I. 1334 ... 15 July 1937 |
|
|