|
|
On rim, double row of raised dots ending in design.
On discus, grooves and ridges. Handle solid, triple grooved. Nozzle rounded.
On bottom, lower half of side decorated with raised dots, similar to Corinth ... 17 June 1931 ... Lamp |
Nozzle and handle missing.
Ball-shaped body; at the top of the body, where it meets the rim, two shallow grooves. Rounded rim, sloping, set off from body by groove.
Small, fairly high base.
Glazed on the ... 18 July 1931 ... shallow grooves. Rounded rim, |
| Vertical band handle broken away.
Double convex body.
Rim broad, decorated with ribs.
Discus plain, surrounded by groove; central filling hole.
Nozzle long, large, with central ridge and wide-spread, rounded ... 29 February 1932 ... Lamp |
Vertical handle broken away.
Rim and body covered with small globules.
Plain discus, concave, with ridges round outer edge.
On nozzle, degenerate volutes affording transition to rim.
Handle together with ... 5 May 1932 ... Lamp |
| Nozzle area and one-fourth of wall, trace of base.
Raised base, curved wall, round shoulder. Offset on top. Short nozzle.
Shiny red glaze on upper body, nozzle and inside.
Attic clay, rather soft.
Type ... 27 June-5 August 1972 ... round shoulder. Offset on |
Most of the upper part of the collar around the body and nozzle broken away; also the handle.
Very shallow body, ribbed in its upper part; cornucopia-shaped lug at one side, and four holes. Rounded nozzle ... 17 April 1939 ... Lamp |
Base and about one-third of body preserved. Rim and nozzle missing.
Thick bottom on a low base, rising to a cone inside. Rounded walls.
Smootly finished outside; glaze red, badly worn, inside only.
Type ... 3 June 1937 ... cone inside. Rounded walls ... 444, making the lamp |
Rim narrow, with ring of small globules.
On discus, crescent below central filling hole; round outer edge, successive grooves and ridges.
Nozzle, sharply differentiated from body of lamp, as in type XXVII ... 4 May 1932 ... Lamp |
|
|
