|
About one-third of rim missing.
Flat resting surface; pointed underside. Convex wall with groove at one-third height, flaring at top. Lip undercut on inside. Slight nipple at center of floor. Dull to ... 150-110 ... H. 6.4; Diam. 24.7; Diam. of foot 8.7. |
Two-thirds of rim and wall missing.
Irregular, angular foot; flat resting surface; pointed underside, mostly unglazed. Straight wall, flaring at top. Rim deeply undercut on inside. Dull black glaze with ... 150-110 ... H. A. Thompson 1934, E 3, p. 394. |
One-third of rim and fragments of wall missing.
Flat resting surface. Irregular, straight wall with slight angle below rim. Shiny black glaze, red on stacking circle and underneath; finger marks on foot ... 150-110 ... H. A. Thompson 1934, E 15, p. 394. |
Over half of rim and parts of wall and floor missing.
Rounded resting surface; pointed underside. Convex body with slight flare at top. Rim slightly undercut inside. Metallic brown glaze, mostly missing; ... 150-110 ... H. A. Thompson 1934, E 12, p. 394. |
About one-sixth of rim and one-eighth of floor and wall preserved; center of floor missing.
Flat resting surface. Convex wall, concave above angle at top. Rim slightly concave on top, slightly undercut ... 150-110 ... H. A. Thompson 1934, E 20, p. 395. |
Italian Thin-walled Ware Beaker.
Part of rim, wall, and floor restored.
Underside slightly convex. Deep body, concave at bottom and widening to convex upper body, contracted below rim. Flaring rim with ... Context of 100-75 ... H. 11.0; Diam. 6.8. |
Parts of lower body and flange and half of cylinder preserved.
Flat resting surface; slightly convex underside. Fairly shallow lower body. High, sharply inclined, wheel-ridged cylinder with slight offset ... 130-110 ... H. A. Thompson 1934, E 51, p. 397, fig. 85. |
Half of wall and rim missing.
Flaring foot; broad, flat resting surface; pointed underside runs into inner face of foot. Angular profile. Wall offset from floor. Dull black glaze.
Similar: P 17026 (B ... 150-110 ... H. 4.9; Diam. 11.1; Diam. of foot 5.4. |
|
|