|
|
| Fragment of nozzle and rim. Lower half and tip of nozzle missing.
Rather narrow rim, sloping towards the central opening; set off from the side by an unglazed groove. Fairly broad nozzle, flat on top; ... 21 July 1931 |
Miniature lamp.
Rim merges with the body; at the inner edge, a groove, and a small ridge round the central opening.
Sides curving outwrad toward junction with rim. Irregular nozzle, spoon-shaped; rather ... 22 July 1931 |
Front part of lamp.
Rim merging with sides; broken along inner edge; close to the break, traces of a reserved band.
Short nozzle, shallow, rounded, encroaching on rim. No base; under surface slightly concave ... 10 August 1931 |
Nozzle and fragment of rim preserved.
On rim, single rill, its bottom reserved.
Nozzle long and deep, scratched in dry clay of its top.
Thin, somewhat metallic black glaze inside and outside.
Fine red ... 17 July 1931 |
Nozzle and front half of infundibulum preserved.
On rim, single groove around filling hole. Mold made.
Traces of knob of left side of body.
Nozzle long, rounded at tip, line of attachment to body on either ... 1931 |
Tip of nozzle missing.
Double convex body, with concave top. Wheel made.
Rising vertical band handle, broken at back; long nozzle.
Slightly rising bottom, with central raised disc; base indicated by groove ... 6 February 1932 |
Double convex body, upper part deeper than lower. Traces of pierced knob on left side. On top, two shallow, concentric grooves; edges of filling hole, broken away, probably rose a little.
Nozzle, pointed, ... 12 February 1932 |
| No handle or knob.
Squat body, rounding, merging with rim from which it is set off only by a very shallow groove.
Nozzle, fairly flat on top, but rounding toward wick hole. Nozzle is long and pointed; ... 16 February 1932 |
| End of nozzle broken away.
Double convex, shallow body, the lower part rather deeper than the upper; join between lower part and moulded upper part clearly seen.
On rim, plain round filling hole; set off ... 19 February 1932 |
Fragment of nozzle and top.
Long nozzle, fairly deep, with rather small wick hole. Top flat with incurving sides. Not quite full depth of nozzle preserved.
On top an erect, flat-topped rim 0.02m. wide ... 19 February 1932 |
Fragment of bottom.
Raised base, rising. Rather carefully trimmed. Mold made.
Graffiti in dry clay.
Glazed all over including under side of base. Late black glaze with silvery lustre.
Attic clay.
Type ... 19 February 1932 |
Fragment of top and back and sides.
Double convex body, with lower part deeper than upper. Wheel made.
On top, depression around filling hole with diameter ca. 0.019m. Shallow groove surrounds depression ... 20 February 1932 |
Tip of nozzle broken off. No handle. Mold made.
Deep, rather angular body, with greatest diameter near bottom.
Top flat covered, surrounded by raised edge.
Long, deep, wide nozzle, with narrow flat top ... 20 February 1932 |
| Left side of body broken off. Horizontal band handle broken away.
Body narrows slightly toward top. Medium wide rim, down sloping; set off from body by wide deep groove.
Long nozzle, flat on top; rather ... 24 February 1932 |
Handle broken away.
Body with much rounded sides, with greatest diameter below center.
Slightly raised rim, set off by well-marked groove.
Perforated knob on left side of body.
Long nozzle, tubular (no ... 1 March 1932 |
Fragment of nozzle, rim, and base from large, multiple lamp.
Rim seems to be set off by groove and moulded edge, from which it extends inward horizontally.
Long nozzle, deep. Flat top with edges slighlty ... 1 March 1932 |
| Fragment of nozzle, top and sides. Top and end of nozzle broken away.
Body, sharply profiled.
Raised edge of top; just within, two small holes, spaced as though originally four; center of convex top, slightly ... 1 March 1932 |
| Shallow body, unevenly double convex, the broader upper part forming an incurving rim. Top open.
Body wall pulled outward with the thumb to form an open nozzle, now chipped at the end. Vertical handle ... 11 March 1932 |
Top of standard of small lamp. No handle.
Somewhat curving body, with greatest diameter below center.
On top, groove with small inner raised edge around central opening.
Small nozzle, with large wick hole ... 2 March 1932 |
| Open nozzle, with cothon handle. Mended from many fragments; part of the bottom missing.
Flaring rim, nearly flat at back, curving upwards toward front to form the pinched in nozzle. Low broad body with ... 29 February 1932 |
Left side broken away; lamp mended from two fragments.
Narrow rim, sloping; set off by deep groove from well rounded body.
Nozzle, flat on top, with letter "Δ" incised in the dry clay, on top of nozzle; ... 15 March 1932 |
Lamp mended from several fragments; part of back missing. Vertical band handle broken away. No base. Wheel made.
Rounded double convex body.
Top, slightly depressed. Nozzle, square at end, curving on top ... 17 March 1932 |
| Two small pieces missing, from rim and from body. Wheel made.
Double convex body. Depressed top.
Short nozzle, slightly turned up at fluked ends.
Base simulated by a groove round the bottom of the body ... 16 March 1932 |
A heavy triangular nozzle is preserved, rather shallow, flat on top, and with an extremely small wick hole in the tip.
The top of the nozzle merges with a small rim, down sloping round what appears to ... 19 March 1932 |
Miniature lamp. No handle.
Continuous rim, with rounded body.
Nozzle, flat on top; deep and broad.
High base.
Rather thin, lustrous black glaze, much flaked; base and lower front part of body, unglazed ... 30 March 1932 |
Upper part of two storied lamp. Nozzle, together with part of left side of lamp broken away. Traces of burning remain.
Rim, finished with a heavy ring round the outside and round the oil hole; the outer ... 31 March 1932 |
Lamp with incised decoration on nozzle. Vertical band handle broken away.
Shallow, double convex body. Wheel made.
Rim indicated only by groove scratched through glaze round filling hole; a similar scratched ... 2 April 1932 |
Left side of lamp, tip and left side of nozzle missing.
Shallow, curving body; the flat rim merging with the sides.
Small, horizontal band handle.
Small nozzle, encroaching somewhat on rim.
The inside, ... 2 April 1932 |
Seems to preserve part of central tube for setting on stand.
Good brownish-black glaze, much worn.
Gray clay.
Type XIX (?) of Corinth collection, type 27 variants of Agora collection. Leica, L-91 PD 635-100 ... 4 April 1932 |
Body with nearly vertical sides, curving in rapidly to base from point of greatest circumference.
Broad top; meets sides at an angle; filling hole, surrounded by narrow insloping rim set off by broad groove ... 5 April 1932 |
| Double convex body, the lower half much deeper than the upper; on the left side, a solid, cornucopia-like knob.
Very small top, surrounded by a heavy ridge.
Long nozzle, rising to a narrow grooved band ... 16 April 1932 |
Vertical band handle broken away.
Body approaching double convex.
Down sloping rim, set off from body by groove.
Narrow nozzle, pointed; flat on top.
At the left side a pierced knob, projecting to a point ... 18 April 1932 |
Body approaching double convex; upper part larger than lower, rising to filling hole which is set off by a groove; no handle or knob.
Down sloping rim, set off from body by groove.
Long nozzle, blunt at ... 18 April 1932 |
Horizontal band handle broken away.
Body with slightly profiled sides, sloping in to top.
On rim, narrow band, set off from body by groove.
Rather small nozzle; flat on top.
Small base, rising inside ... 18 April 1932 |
| Lamp with two opposite nozzles and solid projection in center of infundibulum.
Rounded body, sloping in towards top.
On rim, narrow band round large filling hole; set off from body by deep unglazed groove ... 18 April 1932 |
| Body, nearly vertical sided; name scratched along right side.
Narrow rim, sloping; set off from body by scraped groove.
Long, deep nozzle; the first four letters of the name repeated, scratched in the ... 18 April 1932 |
| Three nozzles equally spaced round low circular body. Low cup in center of infundibulum.
Shallow body; slightly rounding; no handle.
Very narrow rim, sloping down round extremerly large central opening; ... 18 April 1932 |
| Slightly rounding body, with pierced knob on left side.
Short nozzle, flat on top.
Broad sloping rim, set off from body by deep groove, partly scraped free of glaze.
High base, rising to a point in the ... 18 April 1932 |
| Sharply double convex body, with large solid knob on left side.
On top, wide raised band, sloping down toward filling hole.
Long nozzle, rounded at end, the nozzle broadening toward the tip, where the ... 22 April 1932 |
Lamp with two opposite nozzles and central tube. Top of the body broken. Wheel made.
Double convex body, with flat bottom, and a narrow flat rim round a fairly large central opening. From the bottom of ... 22 April 1932 |
|
|
