|
|
Rounded sides; one deep, one narrow groove around the rim.
Clay: fine buff (burned); black-red glaze inside and out. Assembly Place, S.W. corner layer of ashes buried by filling of upper terrace ... 1931 ... Type VII b |
Half of body and end of nozzle missing.
Slightly curved sides. Single groove around top near the edge. Wide convex rim. Pierced lug on left side.
Clay: fine reddish; black glaze (worn) except in groove ... 1932 ... Type VII a |
Nozzle and handle broken off.
Rounded body, approaching "watch shape". Deep groove and three shallow rills around convex rim. Nozzle encroaches on rills, as apparently on most specimens. Horizontal band-handle ... 1932 ... Type VII b |
Back of lamp broken off.
Rounded body; deep grooves and two shallow rills (not present all around) around convex rim. Scratched on top of nozzle: [lettering].
Clay: fine buff; red glaze inside. Assembly ... 1932 ... Type VII b |
Trial piece (?). Low, thick base, rising in the center, with a hole pierced through the center of it. Traces of a nozzle at one side. The glaze is present on the surfaces which are broken.
Clay: fine ... 1932 ... Type VII a |
Rounded sides; trace of pierced knob on left side. Rim raised, with a deep groove around it, and two shallower ones around that.
Clay: fine, very soft buff. Brown glaze inside. Below Great Wall ... 1931 ... Type VII b |
Nozzle chipped.
Rounded sides, with pierced lug on left side. Two deep grooves around rim. Groove around base and raised area in center of bottom.
Clay: fine, buff, poor black glaze inside and out, ... 1932 ... Type VII a |
Slightly curving sides. Rather large hole in nozzle. Deep groove around the rim. Letters scratched onto rim and top of nozzle. Left side broken away.
Clay: fine, reddish, poor black glaze inside and ... 1931 ... Type VII a |
|
|
