|
|
Body approaching double convex; upper part larger than lower, rising to filling hole which is set off by a groove; no handle or knob.
Down sloping rim, set off from body by groove.
Long nozzle, blunt at ... 18 April 1932 |
Horizontal band handle broken away.
Body with slightly profiled sides, sloping in to top.
On rim, narrow band, set off from body by groove.
Rather small nozzle; flat on top.
Small base, rising inside ... 18 April 1932 |
| Lamp with two opposite nozzles and solid projection in center of infundibulum.
Rounded body, sloping in towards top.
On rim, narrow band round large filling hole; set off from body by deep unglazed groove ... 18 April 1932 |
| Body, nearly vertical sided; name scratched along right side.
Narrow rim, sloping; set off from body by scraped groove.
Long, deep nozzle; the first four letters of the name repeated, scratched in the ... 18 April 1932 |
| Three nozzles equally spaced round low circular body. Low cup in center of infundibulum.
Shallow body; slightly rounding; no handle.
Very narrow rim, sloping down round extremerly large central opening; ... 18 April 1932 |
| Slightly rounding body, with pierced knob on left side.
Short nozzle, flat on top.
Broad sloping rim, set off from body by deep groove, partly scraped free of glaze.
High base, rising to a point in the ... 18 April 1932 |
| Sharply double convex body, with large solid knob on left side.
On top, wide raised band, sloping down toward filling hole.
Long nozzle, rounded at end, the nozzle broadening toward the tip, where the ... 22 April 1932 |
Lamp with two opposite nozzles and central tube. Top of the body broken. Wheel made.
Double convex body, with flat bottom, and a narrow flat rim round a fairly large central opening. From the bottom of ... 22 April 1932 |
|
|
